Util: Fast (Fast Code Options); Util: Fast) Cnfg (Fast Configuration) - Comtech EF Data CDM-570A Installation And Operation Manual

CDM-570A/570AL Satellite Modem with Optional Packet Processor
Front Panel Operation
6.3.7.7

UTIL: FAST (FAST Code Options)

Chapter 5. FAST ACTIVATION PROCEDURE
FAST:Cnfg View (HW0.XXX)
MainBoard S/N: 123456789
FAST (Fully Accessible System Topology) provides the means to enable new options in the
modem. Contact Comtech EF Data during normal business hours to obtain the FAST Access Code
for the desired option.
The FAST menu allows you to configure (enter) a new FAST Access Code into the modem, view
which options are currently installed, and enable Demo Mode. This screen also identifies the
Hardware Revision Number on the top line, and the Main Board Serial Number on the bottom
line.
The MainBoard Serial Number is a unique identifier for the FAST upgrade process and
is different from the Chassis Serial Number. This number is required in order to obtain
a new FAST Access Code from Comtech EF Data Product Support.
◄ ►
Use the arrow keys to select Cnfg or View. Press ENTER.
6.3.7.7.1

(UTIL: FAST) Cnfg (FAST Configuration)

FAST Configuration:
Edit Code
◄ ►
Use the arrow keys to select Edit Code or Demo Mode. Press ENTER.
(UTIL: FAST) FAST Configuration  Edit Code
See Chapter 5. FAST ACTIVATION PROCEDURE for further information.
FAST: Edit register 2
00000000000000000000 ENT
(UTIL: FAST) FAST Configuration  Demo Mode
FAST Demo Mode: Off
2592000 seconds remain
◄ ►
Use the
Demo Mode allows access to ALL modem FAST options for 2592000 seconds (30 calendar
days). Once you turn Demo Mode On, the available time decrements and the bottom line of
Demo Mode
On
arrow keys to select FAST Demo Mode as Off or On. Press ENTER.
6–61
MN-CDM570A
Revision 3