Profibus Slave Dp Parameters; Figure153: "Dp Parameters" Tab; Table 229: "Dp Parameters" Tab - WAGO I/O SYSTEM 750 Manual
750-8208
pfc200 cs 2eth rs can dpm
plc - controller pfc200
Hide thumbs
Also See for I/O SYSTEM 750:
- Manual (296 pages) ,
- Quickstart reference (54 pages) ,
- Quick start manual (18 pages)
Table of Contents
Advertisement
350
PROFIBUS DP-V1 Master
11.1.3.2
PROFIBUS Slave DP Parameters
Figure153: "DP Parameters" Tab
Table 229: "DP Parameters" Tab
Parameters
Info
Manufacturer
Revision
ID No.:
HW Release
SW Release
File Name
Identification
Station address
Station name
Activation
Slave active in current configuration
750-8208 PFC200 CS 2ETH RS CAN DPM
Description
General information on the PROFIBUS
slave from the GSD file.
Enter the station address to which the
slave is set here (1 ... 125).
Station name from the GSD file.
This function is not currently
implemented, making it necessary to
select it each time.
Version 1.1.0, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
Manual
Advertisement
Chapters
Table of Contents
Troubleshooting
