WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
7
Commissioning
7.1
Determining the IP Address of the Host PC
To ensure that the host PC can communicate with the controller via ETHERNET,
both devices must be located in the same subnet.
To determine the IP address of the host PC (with the Microsoft Windows
operating system) using the MS DOS prompt, proceed as follows:
1.
Open the MS DOS prompt window.
To do this, enter the command "cmd" in the input field under Start >
Execute... > Open: (Windows
(Windows
2.
In the MS DOS prompt enter the command "ipconfig" and then press
[Enter].
3.
The IP address, subnet mask and standard gateway, including the
appropriate parameters, are displayed.
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
®
7) and then click [OK] or press [Enter].
®
XP) or Start > Search programs/files
Commissioning
81
®