With Hart Dynamic Variables On Profibus Dp/V1 750-333 And 750-833; Figure 24: Wago-I/O-Pro Project With Incorporated Library "Wagolibhart_0X.lib; Table 39: Operating Mode For Profibus Dp/V1 - WAGO 750-484 Manual

2 ai 4-20 ma hart ex i 2-channel-analog input module 4-20 ma hart, ex i

Hide thumbs Also See for 750-484:

Table of Contents

WAGO-I/O-SYSTEM 750

750-484 2 AI 4-20 mA HART Ex i

You can then access the HART commands directly in your project and also

execute these locally from your IEC 61131-3 application.

Additional Information about WAGO-I/O-PRO CAA

You will find a detailed description of the functions and use of the WAGO-I/O-

PRO CAA IEC 61131-3 programming tool in the 759-333 WAGO-I/O-PRO

CAA manual on the Internet at:

www.wago.com

10.2

With HART Dynamic Variables on PROFIBUS DP/V1

750-333 and 750-833

When connecting to the PROFIBUS DP/V1 Coupler 750-333 or Controller

750-833, there is a choice of four operating modes, "2AI + 1, 2, 3, 4 HART

variables per channel", in which the incorporation of one, two, three or four

HART variables per channel in the cyclic process image can be set up for the

analog values.

2 AI + 1 HART variable per Channel

2 AI + 2 HART variables per Channel

2 AI + 3 HART variables per Channel

2 AI + 4 HART variables per Channel

Manual

V 1.2.0 HW-Version 04, SW-Version 03

Description of Operation

Table of Contents

Chapters

Table of Contents