Configuration And Parameterization Via Gsd File; 4Ai U/I Diff/Galv Configuration; Profibus Dp Fieldbus Couplers 750-333/040-000; Table 44: Profibus Dp Configuration - WAGO 750 XTR Manual

WAGO I/O System 750 XTR
750-471/040-000 4AI U/I Diff Galv XTR
The I/O module can also be parameterized via PROFIBUS and PROFINET
device description (GSD file).
7.2

Configuration and Parameterization via GSD File

Behavior after Overwriting with WAGO-I/O-CHECK!
If WAGO-I/O-CHECK is used to overwrite a parameterization made with the GSD
file, the I/O module operates with the WAGO-I/O-CHECK settings until the
750-333/040-000 Fieldbus Couplers are restarted.
After restart, the I/O module is re-parameterized via PROFIBUS using the GSD
settings.
7.2.1

4AI U/I Diff/Galv Configuration

7.2.1.1

PROFIBUS DP Fieldbus Couplers 750-333/040-000

When using the aforementioned PROFIBUS DP fieldbus devices, the process
image size is configured by selecting the corresponding GSD entry.

Table 44: PROFIBUS DP Configuration

GSD Entry
Module
75x-471 4AI/U/I Diff/Galv
75x-471 4AI/U/I Diff/Galv RA
PI-Length/[Byte]
Sub- I
Module
8 n/a
n/a
12 12
Commissioning
Data Type
O
INT16
{UINT8, INT16}
Manual
Version 1.0.2
71
Inst.
4