General Firewall Configuration" Page; Global Firewall Parameters" Group; Table 54: Wbm "General Firewall Configuration" Page - "Global Firewall Parameters" Group - WAGO I/O SYSTEM 750 Manual

110 Commissioning
7.6.1.10

"General Firewall Configuration" Page

7.6.1.10.1 "Global Firewall Parameters" Group

Table 54: WBM "General Firewall Configuration" Page – "Global Firewall Parameters" Group
Parameters
Firewall enabled entirely
ICMP echo broadcast
protection
Max. UDP connections per
second
Max. TCP connections per
second
Click [Submit] to apply the change. The change is effective immediately.
750-8208 PFC200 CS 2ETH RS CAN DPM
Explanation
Enables/disables the complete functionality of the
firewall. This setting has the highest priority. If the
firewall is disabled, all other settings have no direct
effect. The configuration of the other parameters is
possible nevertheless so that you can set the firewall
parameters correctly before you enable the firewall.
Enable or disable the "ICMP echo broadcast"
protection.
You can specify the maximum number of UDP
connections per second.
You can specify the maximum number of TCP
connections per second.
Version 1.1.0, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
Manual