Figure 115: Adding A Canopen Slave - WAGO I/O SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
EDS Files
The EDS files for current components of the WAGO-I/O-SYSTEM are integrated
in the target files for the controller. The associated EDS files are required for
incorporation of non-WAGO devices. For this, click "Tools" > "Add
configuration file" in the menu bar.
Only use the supplied EDS files for CODESYS 2.3!
The EDS files for the PFC200 CANopen slave, which are supplied in the target
files for the controller, can only be used if the CODESYS 2.3 runtime system is
used on the controller!

Figure 115: Adding a CANopen Slave

Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
CANopen Master and Slave 309