Figure 80: Debugging (Case 5); Figure 81: Debugging (Case 6) - WAGO I/O SYSTEM 750 Manual

230 Run-time System CODESYS 2.3 WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
As soon as a task is located at a breakpoint, only all other tasks can be controlled
with the mode selector switch.
Exception: If the mode selector switch is on STOP, the debug task is also no
longer processed.

Figure 80: Debugging (Case 5)

Figure 81: Debugging (Case 6)

Manual
Version 1.1.0, valid from FW Version 02.06.20(09)