202
Commissioning
</dg_
7.6.5
Configuration using "WAGO ETHERNET Settings"
The "WAGO ETHERNET Settings" program enables you to read system
information about your controller, make network settings and enable/disable the
Web server.
Observe the software version!
To configure the controller, use at least Version 6.4.1.1 dated 2015-06-29 or
newer of "WAGO ETHERNET Settings"!
You must select the correct COM port after starting "WAGO ETHERNET
Settings".
Figure 45: "WAGO ETHERNET Settings" – Start Screen
For this, click "Settings" and then "Communication".
In the "Communication settings" window that then opens, adapt the settings to
your needs.
750-8208 PFC200 CS 2ETH RS CAN DPM
Version 1.1.0, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
Manual