Modbus Services Configuration" Page; Modbus Tcp" Group; Modbus Udp" Group; Table 89: Wbm "Modbus Services Configuration" Page - "Modbus Tcp - WAGO I/O SYSTEM 750 Manual

140 Commissioning
7.6.1.31

"MODBUS Services Configuration" Page

The settings for various MODBUS services are shown on the "MODBUS
Services Configuration" page. The groups are only visible if the e!RUNTIME
system is enabled. Otherwise an information text is displayed.

7.6.1.31.1 "MODBUS TCP" Group

Table 89: WBM "MODBUS Services Configuration" Page – "MODBUS TCP" Group
Parameter
Service active
Click the [Submit] button to apply the changes. The change is effective
immediately.

7.6.1.31.2 "MODBUS UDP" Group

Table 90: WBM "MODBUS Configuration Services" Page – "MODBUS UDP" Group
Parameter
Service active
Click the [Submit] button to apply the changes. The change is effective
immediately.
750-8208 PFC200 CS 2ETH RS CAN DPM
Explanation
Disable or enable the MODBUS/TCP service here.
Explanation
Disable/enable the MODBUS-UDP service here.
Version 1.1.0, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
Manual