WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
Figure 134: Online View of the Variable Window (Top Window) in FUP
3.
The binary code facilitates the evaluation of the individual diagnostic bits.
You can have the diagnostic information of the array EXTENDEDINFO
displayed as binary code. To do this, right click in the variable window and
select binary.
Figure 135: Example of Diagnostics
4.
Compare the three lowest value bits of the diagnostic information of the
slaves with station addresses 2 and 5 with the bits from the following table:
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Array
0: No slaves or non-configured slaves
≠ 0: Configured slaves
CANopen Master and Slave
Station address 4 of the I/O IPC
Three least significant bits
Station address 2 of the slave
Station address 5 of the slave
329