With Hart Dynamic Variables On Profibus Dp/V1 750-333 And 750-833; Figure 17: Wago-I/O-Pro Project With Integrated "Wagolibhart_0X.lib; Table 39: Operating Mode For Profibus Dp/V1 - WAGO 750-482/000-001 Manual

62 Commissioning
You can then access the HART commands directly in your project and
execute these locally from your "IEC 61131-3" application.
Figure 17: WAGO-I/O-PRO Project with Integrated "WagoLibHART_0x.lib" Library
More information about WAGO-I/O-PRO CAA
Detailed descriptions of the functions and use of the WAGO-I/O-PRO CAA IEC
61131-3 programming tool are available in the WAGO-I/O-PRO CAA (759-333)
manual on the Internet at: www.wago.com
9.2 With HART Dynamic Variables on PROFIBUS DP/V1
750-333 and 750-833
When connecting to the PROFIBUS DP/V1 Coupler 750-333 or Controller
750-833, there is a choice of four operating modes, "2AI + 1, 2, 3, 4 HART
variables per channel", in which the incorporation of one, two, three or four HART
variables per channel in the cyclic process image can be set up for the analog
values.

Table 39: Operating Mode for PROFIBUS DP/V1

2 AI + 1 HART variable per Channel
2 AI + 2 HART variables per Channel
2 AI + 3 HART variables per Channel
2 AI + 4 HART variables per Channel
Manual
Version 1.0.2
750-482/000-001 2AI 4-20mA HART NAMUR NE43
WAGO I/O System 750