362
PROFIBUS DP-V1 Master
11.3.3
Creating Diagnostics in CODESYS 2.3
In order to execute bus diagnostics or subscriber diagnostics for the slaves, it is
necessary to integrate the BusDiag.lib library into CODESYS. This library
contains the necessary function blocks DiagGetBusState() for bus diagnostics and
DiagGetState() for subscriber diagnostics.
Integrate the BusDiag.lib library into CODESYS as described below:
1.
Click on the "Resources" tab.
Figure 163: "Resources" tab
2.
Double-click on "Library administrator" in the left column.
750-8208 PFC200 CS 2ETH RS CAN DPM
Version 1.1.0, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
Manual