Certificate Upload" Group; Certificate List" Group; Private Key List" Group; Table 102: Wbm "Configuration Of Openvpn And Ipsec" Page - "Certificate Upload" Group - WAGO I/O SYSTEM 750 Manual

148 Commissioning
To transfer the selected file from the controller to the PC, click [Start Download]
button.
The changes only take effect after restarting the controller. For this purpose, use
the WBM reboot function. Do not shut down the controller too early!

7.6.1.36.3 "Certificate Upload" Group

Table 102: WBM "Configuration of OpenVPN and IPsec" Page – "Certificate Upload" Group
Parameters
New Certificate
New Private Key
To select a file on the PC, click the [Browse] button.
To transfer the selected file to the controller, click [Start Upload] button. The
changes will be effective immediately.
The certificates are saved in the directory "/etc/certificates/" and the keys in the
directory "/etc/certificates/keys/".

7.6.1.36.4 "Certificate List" Group

Table 103: WBM "Configuration of OpenVPN and IPsec" Page – "Certificate List" Group
Parameters
<certificate name>
Click [Delete] to delete an entry. The changes will be effective immediately.

7.6.1.36.5 "Private Key List" Group

Table 104: WBM "Configuration of OpenVPN and IPsec" Page – "Private Key List" Group
Parameters
<key name>
Click [Delete] to delete an entry. The changes will be effective immediately.
750-8208 PFC200 CS 2ETH RS CAN DPM
Explanation
Select an certificate for transfer from a PC to the
controller.
Select a key for transfer from a PC to the controller.
Explanation
The loaded certificates are displayed. If no certificate
has been loaded. "No certificates existing" is
displayed.
Explanation
The loaded keys are displayed. If no keys has been
loaded. "No keys existing" is displayed.
Version 1.1.0, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
Manual