WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
Observe permissible resistor power loss!
For normal operation, 1/4 Watt resistors are sufficient. In the event of a short
circuit (24 V power supply to a bus line), the resistor is subjected to a power loss
of (short-circuit output current from transceiver * power supply voltage). The
resistor must be designed to withstand this power loss level.
Figure 13: CANopen Standard Bus Termination
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Device Description
39