Firewall" > "Mac Address Filter" Submenu; Table 140: "Firewall" > "Mac Address Filter" Submenu - WAGO I/O SYSTEM 750 Manual

174 Commissioning
7.6.4.5.3 "Firewall" > "MAC Address Filter" Submenu
This submenu contains the settings for the MAC address filter.
Table 140: "Firewall" > "MAC Address Filter" Submenu
Menu Item
0. Back to ...
1. MAC address filter
whitelist
2. MAC address filter state
VPN
3. MAC address filter state
WAN
4. MAC address filter state
X1
5. MAC address filter state
X2
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
750-8208 PFC200 CS 2ETH RS CAN DPM
Submenu Item / Explanation
Back to the higher-level menu
Opens a submenu to edit the MAC address filter
whitelist
Enable or disable the firewall for the VPN interface.
0. Back to ... Back to the higher-level menu
The firewall for the VPN interface is
1. Open
disabled.
The firewall for the VPN interface is
2. Filtered
enabled.
Enable or disable the firewall for the WAN interface.
0. Back to ... Back to the higher-level menu
The firewall for the WAN interface is
1. Open
disabled.
The firewall for the WAN interface is
2. Filtered
enabled.
Enable or disable the firewall for the X1 interface.
0. Back to ... Back to the higher-level menu
The firewall for the X1 interface is
1. Open
disabled.
The firewall for the X1 interface is
2. Filtered
enabled.
Enable or disable the firewall for the X2 interface.
0. Back to ... Back to the higher-level menu
The firewall for the X2 interface is
1. Open
disabled.
The firewall for the X2 interface is
2. Filtered
enabled.
Version 1.1.0, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
Manual