356
PROFIBUS DP-V1 Master
11.1.3.5
PROFIBUS Slave Group Allocation
Figure 156: "Group Allocation" Tab
Table 232: "Group Allocation" Tab
Parameters
Group Membership
Sync. Mode
Freeze Mode
Global Group Properties
750-8208 PFC200 CS 2ETH RS CAN DPM
Description
Here it is possible to add the selected
slave to a group for use of multiple-
point transfers using multicast
communication.
Here it is possible to set whether the
slave output data from a certain group is
to be written synchronously into the
process image during a global control
command.
Here it is possible to set whether the
slave input data is to be practically
"frozen" at a certain point in time.
Here it is possible to set whether the
"Sync. Mode" and/or the "Freeze
Mode" is to be used for a group.
Version 1.1.0, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
Manual