Status Bar; Configuration And Parameterization Using A Gsd File With Profibus Dp And Profinet Io; Appendix; Figure 35: Status Bar In The Parameterization Dialog - WAGO 750 Series Manual

WAGO I/O SYSTEM 750
750-498 8AI; TC; Adjust
7.1.1.7

Status Bar

The following information is displayed in the status bar:
• Status indication with display of the currently executed action as text or the
respective error message if an error occurs
• A progress bar is displayed as the actions are executed
• Online status
• IP address or COM interface

Figure 35: Status Bar in the Parameterization Dialog

7.2 Configuration and Parameterization using a GSD
File with PROFIBUS DP and PROFINET IO
A GSD (device master data) file can be used to configure the parameters of the
I/O module 750-498.
Description of parameterization/configuration per GSD in the appendix!
Other methods are available for parameterization depending on the fieldbus
coupler/controller. Detailed information is available in the appendix.
Commissioning 79
Manual
Version 1.0.0