WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
11.1.2
PROFIBUS Master PLC Configuration
The global settings and monitoring parameters for the PROFIBUS master can be
defined using the tabs for the PROFIBUS master.
11.1.2.1
PROFIBUS Master basic parameters
Figure 148: "Basic parameters" Tab
Table 224: "Basic parameters" Tab
Parameters
Module ID
Node ID
Diagnostic address
Comments
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
PROFIBUS DP-V1 Master
Description
Parameters that use the runtime system
CODESYS.
Comments can be entered here.
343