Package Server" Menu; Package Server" > "Firmware Backup" Submenu; Table 149: "Package Server" Menu; Table 150: "Package Server" > "Firmware Backup" Menu - WAGO I/O SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
7.6.4.8

"Package Server" Menu

This menu contains other submenus with functions for firmware backup and
restore, as well as information and setting options for the current system partition.

Table 149: "Package Server" Menu

Menu Item
0. Back to ...
1. Firmware Backup
2. Firmware Restore
3. System Partition
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
7.6.4.8.1 "Package Server" > "Firmware Backup" Submenu
This submenu contains a selection option for the data to be saved.
The submenu only appears if a memory card is inserted that does not contain a
bootable system. Otherwise, a message is displayed.
Table 150: "Package Server" > "Firmware Backup" Menu
Menu Item
0. Back to ...
1. All
2. PLC Runtime project
3. Settings
4. System
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
You are taken to the following submenu after making the selection.
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Explanation
Back to the higher-level menu
Opens a submenu with functions for the firmware
backup
Opens a submenu with functions for the firmware
restore
Opens a submenu with information and setting
options for the current system partition
Explanation
Back to the higher-level menu
All data is saved.
The PLC runtime project is saved.
The controller settings are saved.
The controller operating system is saved.
Commissioning 181