Table 321: Description Of The Configuration Scripts For "Clock; Table 322: Description Of The Configuration Scripts For "Administration - WAGO I/O SYSTEM 750 Manual

438 Appendix

Table 321: Description of the Configuration Scripts for "Clock"

Parameters Status Call-Up
Clock
Time and Date
Date on device,
local
Time on
device, UTC
Time on
device, local
12-Hour-
Format
Time Zone
TZ-String

Table 322: Description of the Configuration Scripts for "Administration"

Parameters Status Call
Administration
Configuration of Serial Interface
Configuration
of serial
interface
get_clock_data
read
date-local
config_clock
write type=local
date=<Datum>
get_clock_data
read
time-utc
config_clock
write
type=utc time=<Time>
get_clock_data
read
time-local
config_clock
write type=local
time=<Time>
get_clock_data
read
display-mode
config_clock _
write display_mode
display-mode=<value>
get_clock_data
read
tz-string
config_timezone
write
tz-string=<String>
get_coupler_details
read
RS232-owner
config_RS232
write
owner=<value>
750-8208 PFC200 CS 2ETH RS CAN DPM
Output/Input
Local time and date
Change date. The format for
<date> is: DD.MM.YYYY
Time/UTC
Change time, based on UTC
time. The format for <time>
is: hh:mm:ss xx
Time/local time
Change time, based on local
time. The format for <time>
is: hh:mm:ss xx
Presentation format either as
12 or 24-hour format:
Possible return values:
- 12-hour-format
- 24-hour-format
Set the presentation format
for the time.
Possible entries for <Value>:
- 12-hour-format
- 24-hour-format
Currently set time zone –
original TZ string as stored in
the operating system.
Change TZ string directly.
Example of <String>:
CET-1CEST,
M3.5.0/2,M10.5.0/3
Output/Input
User of the serial interface
Possible return values are:
- Linux
- None
User of the serial interface
Possible entries for <value> are:
- Linux
- None
Version 1.1.0, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
Effective
Immediately
Immediately
Immediately
Immediately
Immediately
Effecti
ve
immedia
tely
Manual