Snmp" > "(Secure)Snmp Firewalling" Submenu; Table 181: "Snmp" > "(Secure )Snmp Firewalling" Submenu - WAGO I/O SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
7.6.4.12.5 "SNMP" > "(Secure)SNMP firewalling" Submenu
These submenus contain the SNMP firewall settings.
Table 181: "SNMP" > "(Secure )SNMP firewalling" Submenu
Menu Item
0. Back to ...
1. VPN
2. WAN
3. X1
4. X2
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Submenu Item / Explanation
Back to the higher-level menu
Enable or disable the firewall for the VPN interface
and respective service.
0. Back to ... Back to the higher-level menu
Data traffic via the VPN interface is
1. open
permitted.
Data traffic via the VPN interface is
2. close
not permitted.
Enable or disable the firewall for the WAN interface
and respective service.
0. Back to ... Back to the higher-level menu
Data traffic via the WAN interface is
1. open
permitted.
Data traffic via the WAN interface is
2. close
not permitted.
Enable or disable the firewall for the X1 interface
and respective service.
0. Back to ... Back to the higher-level menu
Data traffic via the X1 interface is
1. open
permitted.
Data traffic via the X1 interface is not
2. close
permitted.
Enable or disable the firewall for the X2 interface
and respective service.
0. Back to ... Back to the higher-level menu
Data traffic via the X2 interface is
1. open
permitted.
Data traffic via the X2 interface is not
2. close
permitted.
Commissioning 201