Modbus Tcp Settings; Modbus Udp Settings; Modbus Rtu Settings; Table 194: Modbus Tcp Settings - WAGO I/O SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
9.3.2

MODBUS TCP Settings

The "MODBUS TCP Settings" contains the following configuration parameters
for the "MODBUS TCP" mode:

Table 194: MODBUS TCP Settings

Parameters
TCP mode
TCP port
TCP Timeout Time-out for a TCP link
*
Default setting
9.3.3

MODBUS UDP Settings

The "MODBUS UDP Settings" group contains the following configuration
parameters for the "MODBUS UDP" mode:

Table 195: MODBUS UDP Settings

Parameters
UDP mode
UDP port
*
Default setting
9.3.4

MODBUS RTU Settings

The "MODBUS RTU Settings" group contains the following configuration
parameters for the "MODBUS RTU" mode:
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Explanation
Enable for the MODBUS TCP mode
Off Operation not permitted
*
Active Operation possible
Port number for the TCP link
1 Minimum port number
*
502 MODBUS default port
65535 Maximum port number
1 100 ms (1 × 100 ms)
*
600 60 seconds (600 × 100ms)
65535 1 h 49 min 13 s 500 ms (65535 × 100 ms)
Explanation
Enable for the MODBUS UDP mode
Off Operation not permitted
*
Active Operation possible
Port number for the UDP link
1 Minimum port number
*
502 MODBUS default port
65535 Maximum port number
MODBUS – CODESYS 2 265