WAGO I/O SYSTEM 750 Manual page 333

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
Description of the Function Block's Diagnostic Information
DiagGetState.EXTENDEDINFO for CANopen
The EXTENDEDINFO array contains the following status information:
Byte 0
Bit 0:
Bit 1:
Bit 2:
Bit 3:
Bit 4:
Bit 5:
Bit 6:
Bit 7:
Byte 1
Bit 0:
Bit 1:
Byte 2
Bit 0:
Byte 3
Not used
Byte 4 ... 11
Last emergency message in the list
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Slave entered
Slave entered and configured
Slave configuration invalid
Diagnosis: Emergency event active
Slave status "Operational"
Slave status "Stop"
Slave status "Preoperational"
Erroneous configuration structure (from Master)
Configuration structure incompatible with slave
Slave device detection error
An emergency message is present in the list
CANopen Master and Slave 333