Service Interface; Figure 6: Service Interface (Closed And Open Flap); Table 7: Service Interface - WAGO I/O SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
3.3.4

Service Interface

The service interface is located behind the flap.
The Service interface is used for communication with WAGO-I/O-CHECK and
WAGO-ETHERNET-Settings and for firmware download.

Figure 6: Service Interface (Closed and Open Flap)

Table 7: Service Interface

Number
1
2
Device must be de-energized!
To prevent damage to the device, unplug and plug in the communication cable
only when the device is de-energized!
The connection to the 4-pin header under the cover flap can be realized via the
communication cables with the item numbers750-920 and 750-923 or via the
WAGO radio adapter with the item number 750-921.
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Description
Open flap
Service interface
Device Description 33