Tcp/Ip Configuration" Page; Ip Configuration (Xn)" Group(S); Table 49: Wbm "Tcp/Ip Configuration" Page - "Ip Configuration (Xn) - WAGO I/O SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
</dg_
7.6.1.8

"TCP/IP Configuration" Page

The TCP/IP settings for the ETHERNET interfaces are shown on the "TCP/IP
configuration" page.

7.6.1.8.1 "IP Configuration (Xn)" Group(s)

If the switch is enabled, one group ("IP Configuration") is shown for both
connections.
If the switch is disabled, a separate group ("IP Configuration X1" / "IP
Configuration X2") is shown for each connection.
Table 49: WBM "TCP/IP Configuration" Page – "IP Configuration (Xn)" Group(s)
Parameters
Configuration Type
IP Address
Subnet Mask
Click [Submit] to apply changes. The changes are effective immediately.
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Explanation
Select a static or dynamic IP address.
Static IP Static IP addressing
DHCP Dynamic IP addressing
BootP Dynamic IP addressing
Enter here a static IP address. This is enabled if
"Static IP" is enabled in the Configuration Type
field.
Enter the subnet mask. This is enabled if "Static IP"
is enabled in the Configuration Type field.
Commissioning 105