Licensing Terms Of The Software Package Used; Special Use Conditions For Ethernet Devices - WAGO I/O SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
2.3

Licensing Terms of the Software Package Used

The firmware for the "PFC200 CS 2ETH RS CAN DPM" controller (750-8208)
contains open-source software.
The licence conditions of the software packages are stored in the controller in text
form. They can be accessed via the WBM page "Legal Information" > "Open
Source Software."
You can obtain the source code with licensing terms of the open-source software
from WAGO Kontakttechnik GmbH & Co. KG on request. Send your request to
support@wago.com
2.4

Special Use Conditions for ETHERNET Devices

If not otherwise specified, ETHERNET devices are intended for use on local
networks. Please note the following when using ETHERNET devices in your
system:
• Do not connect control components and control networks to an open
network such as the Internet or an office network. WAGO recommends
putting control components and control networks behind a firewall.
• Limit physical and electronic access to all automation components to
authorized personnel only.
• Change the default passwords before first use! This will reduce the risk of
unauthorized access to your system.
• Regularly change the passwords used! This will reduce the risk of
unauthorized access to your system.
• If remote access to control components and control networks is required,
use a Virtual Private Network (VPN).
• Regularly perform threat analyses. You can check whether the measures
taken meet your security requirements.
• Use "defense-in-depth" mechanisms in your system's security configuration
to restrict the access to and control of individual products and networks.
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
with the subject "Controller Board Support Package."
Important Notes 23