Dns Server - WAGO I/O SYSTEM 750 Manual

64 Function Description
From a Linux
"/etc/dnsmasq.d/dnsmasq_default.conf" to set the configuration.
4.1.4.3

DNS Server

The controller offers the DNS server service for the automatic assignment of
hostnames to IP addresses of network stations.
The DNS server takes over the names and IP addresses of local network stations
from the DHCP server. This DNS server routes requests for non-local names, such
as from the Internet, to higher-level DNS servers if configured and accessible.
The following settings are possible for the DNS server:
- The service itself (enabled/disabled)
- Access type to the assignments
The requests are buffered in "Proxy" mode (throughput optimized).
In Relay mode the requests are routed directly to higher-level name servers.
- A list with up to 15 static assignments of IP addresses to hostnames
If only the hostname is used, the configured or default domain is added to
the hostname automatically to ensure FQDN name resolution.
The settings are made, e.g., in the WBM, via the "Configuration of DNS Service"
page.
®
command line, an editor must be used to change the file
750-8208 PFC200 CS 2ETH RS CAN DPM
Version 1.1.0, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
Manual