Creating Tasks; Figure 71: Task Configuration - WAGO I/O SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
Enter the character string of the absolute address without empty spaces. The first
bit of a word has an address of 0.
8.4

Creating Tasks

Set the time response and the priority of individual tasks in the task configuration.
Watchdog
In an application program without task configuration, there is no watchdog that
monitors the cycle time of the application program (PLC_PRG).
Create a task as follows:
1. Open the task configuration by double-clicking on the "Task configuration"
module in the "Resources" tab.

Figure 71: Task Configuration

2. To create a task right-click on "Task configuration" and in the contextual
menu select "Attach task".
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Run-time System CODESYS 2.3 223