Busdiag.lib; Mod_Com.lib; Sercomm.lib; Table 314: Input Variable "Devicenumber - WAGO I/O SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
15.2.1.6

BusDiag.lib

The controller 750-8208 supports the following function blocks of the
"BusDiag.lib" library:
- DiagGetBusState
- DiagGetState
The document containing a description of this library and the function blocks it
includes is available for download on the Internet at www.wago.com.
The values for the input variables "DEVICENUMBER" of the
"DiagGetBusState" and "DiagGetState" functions are based on the particular
device and bus system and are as follows for the controller "PFC200 CS 2ETH
RS CAN DPM" (750-8208):

Table 314: Input Variable "DEVICENUMBER"

Bus System
Internal data bus
MODBUS
CANopen
PROFIBUS
15.2.1.7

mod_com.lib

The controller 750-8208supports the following function blocks of the
"mod_com.lib" library:
- ADD_PI_INFORMATION
- CRC16
- FBUS_ERROR_INFORMATION
- GET_DIGITAL_INPUT_OFFSET
- GET_DIGITAL_OUTPUT_OFFSET
- KBUS_ERROR_INFORMATION
- MOD_COM_VERSION
- PI_INFORMATION
- SET_DIGITAL_INPUT_OFFSET
- SET_DIGITAL_OUTPUT_OFFSET
- SLAVE_ADDRESS
The document containing a description of this library and the function blocks it
includes is available for download on the Internet at www.wago.com.
15.2.1.8

SerComm.lib

The controller 750-8208supports the following function blocks of the
"SerComm.lib" library:
- SERCOMM
- SERCOMM_VERSION
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Value
0
1
2
3
Appendix 431