Table 286: Counter Modules 750-404/000-005; Table 287: Counter Modules 750-638, 753-638 - WAGO I/O SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
750-404/000-005
The above Counter Modules have a total of 5 bytes of user data in both the Input
and Output Process Image (4 bytes of counter data and 1 byte of control/ status).
The two counter values are supplied as 16 bits. The following tables illustrate the
Input and Output Process Image, which has a total of 3 words mapped into each
image. Word alignment is applied.

Table 286: Counter Modules 750-404/000-005

Input Process Image
Offset
0
1
2
Output Process Image
Offset
0
1
2
750-638,
753-638
The above Counter Modules have a total of 6 bytes of user data in both the Input
and Output Process Image (4 bytes of counter data and 2 bytes of control/status).
The two counter values are supplied as 16 bits. The following tables illustrate the
Input and Output Process Image, which has a total of 4 words mapped into each
image. Word alignment is applied.

Table 287: Counter Modules 750-638, 753-638

Input Process Image
Offset
0
1
2
3
Output Process Image
Offset
0
1
2
3
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Byte Destination
High Byte
-
D1
D3
Byte Destination
High Byte
-
D1
D3
Byte Destination
High Byte
-
D1
-
D3
Byte Destination
High Byte
-
D1
-
D3
Low Byte
S
D0
D2
Low Byte
C
D0 Counter Setting Value of Counter 1
D2 Counter Setting Value of Counter 2
Low Byte
S0
D0 Counter Value von Counter 1
S1
D2 Counter Value von Counter 2
Low Byte
C0 Control byte von Counter 1
D0 Counter Setting Value von Counter 1
C1 Control byte von Counter 2
D2 Counter Setting Value von Counter 2
Appendix
Description
Status byte
Counter Value of Counter 1
Counter Value of Counter 2
Description
Control byte
Description
Status byte von Counter 1
Status byte von Counter 2
Description
411