Table 324: Description Of Configuration Scripts For "Ports And Services" - "Network Services - WAGO I/O SYSTEM 750 Manual

440 Appendix
Table 324: Description of Configuration Scripts for "Ports and Services" – "Network Services
Parameters Status Call-Up
Network Services
Telnet
Telnet Port
FTP
FTP Port
FTPS
FTPS Port
HTTP
HTTP Port
HTTPS
HTTPS Port
get_port_state
read
telnet
config_port
write port=telnet
state=<Value>
config_ssl
read
ftp-status
config_port
write
port=ftp state=<Value>
read config_ssl ftps-status
config_port port=ftps
write
state=<Value>
read config_ssl http-status
config_port port=http
write
state=<Value>
read config_ssl https-status
config_port port=https
write
state=<Value>
750-8208 PFC200 CS 2ETH RS CAN DPM
Output/Input
Read the status of the Telnet
server.
Possible return values:
- enabled
- disabled
Possible entries for <Value>:
- enabled
- disabled
Read the status of the FTP
server.
Possible return values:
- enabled
- disabled
Possible entries for <Value>:
- enabled
- disabled
Read the status of the FTPS port.
Possible return values:
- enabled
- disabled
Activate/Deactivate FTPS.
Possible entries for <Value>:
- enabled
- disabled
Read the status of the HTTP port.
Possible return values:
- enabled
- disabled
Activate/Deactivate HTTP.
Possible entries for <Value>:
- enabled
- disabled
Read the status of the HTTPS
port.
Possible return values:
- enabled
- disabled
Activate/Deactivate HTTPS.
Possible entries for <Value>:
- enabled
- disabled
Version 1.1.0, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
Valid
Right
away
Right
away
Right
away
Right
away
Right
away
Manual