Creating Diagnostics 7 In Codesys 2.3; Figure 128: "Resources" Tab - WAGO I/O SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
10.4.1.1

Creating Diagnostics 7 in CODESYS 2.3

In order to execute bus diagnostics or device diagnostics for the slaves, it is
necessary to integrate the BusDiag.lib library into CODESYS. This library
contains the necessary function blocks DiagGetBusState() for bus diagnostics and
DiagGetState() for participant diagnostics.
Integrate the BusDiag.lib library into CODESYS as described below:
1. Click the "Resources" tab.

Figure 128: "Resources" Tab

2. In the left column, double-click "Library Manager".
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
CANopen Master and Slave 325