Firewall" > "General Configuration" Submenu; Table 138: "Firewall" > "General Configuration" Submenu - WAGO I/O SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
7.6.4.5.1 "Firewall" > "General Configuration" Submenu
This submenu contains the general settings for the firewall.
Table 138: "Firewall" > "General Configuration" Submenu
Menu Item
0. Back to ...
1. Firewall enabled entirely
2. ICMP echo broadcast
protection
3. Max UDP connections
per second
4. Max TCP connections
per second
5. Interface WAN
6. Interface VPN
7. Interface X1
8. Interface X2
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Click [<OK>] to apply the entry.
Click [<Abort>] to discard the entry.
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Submenu Item / Explanation
Back to the higher-level menu
Enables/disables the complete functionality of the
firewall.
0. Back to ... Back to the higher-level menu
1. Enable Firewall is enabled.
2. Disable Firewall is disabled.
Enable or disable the "ICMP echo broadcast"
protection.
0. Back to ... Back to the higher-level menu
"ICMP echo broadcast" protection is
1. Enable
enabled.
"ICMP echo broadcast" protection is
2. Disable
disabled.
You can specify the maximum number of UDP
connections per second.
"0" = "Disabled"
You can specify the maximum number of TCP
connections per second.
"0" = "Disabled"
Opens a submenu with firewall settings on the IP
level for the selected interface
Commissioning 171