WAGO I/O SYSTEM 750 Manual page 289

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
Table 206: Diagnostics for the Error Server
Diagnostics
ID
0x00090006
0x00090007
0x00090008
0x00090009
0x0009000A
0x0009000B
0x0009000C
0x0009000F
0x00090100
0x00090101
0x00090102
0x00090103
0x00090104
0x00090105
0x00090106
0x00090107
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Diagnostic text
Modbus Slave
UDP start failed
Modbus Slave
UDP terminated
Modbus Slave
RTU started
Modbus Slave
RTU start failed
Modbus Slave
RTU terminated
Modbus Slave data
exchange started
by PLC
Modbus Slave data
exchange stopped
by PLC
Modbus Slave
PLC watchdog
timer expired
Modbus Slave
common
configuration
failed.
Modbus Slave
TCP configured
successfully.
Modbus Slave
TCP configuration
failed.
Modbus Slave
UDP configured
successfully
Modbus Slave
UDP configuration
failed.
Modbus Slave
RTU configured
successfully.
Modbus Slave
RTU configuration
failed
Port for Modbus
Slave RTU
operation not free.
MODBUS – CODESYS 2
Method of Explanation
saving
Permanent Starting the MODBUS slave in
UDP mode failed.
Temporary MODBUS slave UDP mode
successfully terminated.
Temporary MODBUS slave successfully
started in the RTU mode.
Permanent Starting the MODBUS slave in
RTU mode failed.
Temporary MODBUS slave RTU mode
successfully terminated.
Temporary MODBUS slave data
exchange started.
Temporary MODBUS slave data
exchange stopped.
Permanent Monitoring time for controller
(PLC) expired.
Permanent MODBUS slave configuration
failed.
Temporary MODBUS slave TCP
configuration completed
successfully.
Permanent MODBUS slave TCP
configuration failed.
Temporary MODBUS slave UDP
configuration completed
successfully.
Permanent MODBUS slave UDP
configuration failed.
Temporary MODBUS slave RTU
configuration completed
successfully.
Permanent MODBUS slave RTU
configuration failed.
Permanent Serial port for MODBUS slave
RTU configuration already
occupied.
289