Configuring The Service Data Objects; Figure 121: Service Data Objects Tab - WAGO I/O SYSTEM 750 Manual

318 CANopen Master and Slave
Table 219: Description of the PDO Properties Window
Parameters
Event Time
10.3.4.5

Configuring the Service Data Objects

Service data objects can also be configured in addition to the configuration
performed on the previous tabs.

Figure 121: Service Data Objects Tab

All objects of the EDS file are listed here, which range from index 0x2000 to
0x9FFF and can be described.
For each object, the index, name, value, type and default are specified.
750-8208 PFC200 CS 2ETH RS CAN DPM
Explanation
Depending on the "transmission type", enter the time
span (in ms) that should elapse between two
transmissions of the PDO. This value is insignificant
for a receive PDO.
Version 1.1.0, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
Manual