Mac Address Filter" > "Mac Address Filter Whitelist" Submenu; Table 141: "Firewall" > "Mac Address Filter" > "Mac Address Filter Whitelist; Table 142: "Firewall" > "Mac Address Filter" > "Mac Address Filter Whitelist" > "Add New / No (N)" Submenu - WAGO I/O SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
7.6.4.5.4 "MAC Address Filter" > "MAC address filter whitelist" Submenu
This submenu displays all available filter entries.
Table 141: "Firewall" > "MAC Address Filter" > "MAC address filter whitelist" Submenu
Menu Item
0. Back to ...
1. Add new
2. Previous page
3. Next Page
(n + 3.) No (n):
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
7.6.4.5.5 "MAC address filter whitelist" > "Add new / No (n)" Submenu
In this submenu, you can create, change or delete filter entries.
Table 142: "Firewall" > "MAC Address Filter" > "MAC address filter whitelist" > "Add new / No
(n)" Submenu
Menu Item
0. Back to ...
1. MAC address
2. MAC mask
3. Filter state
4. accept
5. delete
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Click [<OK>] to apply the entry.
Click [<Abort>] to discard the entry.
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Explanation
Back to the higher-level menu
Opens a submenu to add a new filter entry
You can enter 10 filters.
Displays the previous page of the list (if more than
one page is filled)
Displays the next page of the list (if more than one
page is filled)
Opens a submenu to edit an existing filter entry
Submenu Item / Explanation
Back to the higher-level menu
Enter the MAC address.
Enter the MAC mask.
Enable or disable the filter.
0. Back to ... Back to the higher-level menu
1. on The filter is enabled.
2. off The filter is disabled.
To apply the changes for the selected filter entry,
choose this menu item.
To delete the selected filter entry, choose this menu
item.
Commissioning 175