WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
3.2
Labeling
The front labeling includes:
-
Device designation
-
Name of the display elements, connections and control elements
-
Serial number with hardware and firmware version
The side labeling includes:
-
Manufacturer's identification
-
Connector pin assignment
-
Serial number
-
Approval information
3.2.1
Manufacturing Number
The serial number indicates the delivery status directly after production.
Figure 2: Marking Area for Serial Numbers
There are two serial numbers in two rows in the side marking. They are left of the
release tab. The first 10 positions in the longer row of the serial numbers contain
version and date identifications.
Example structure of the rows: 0114010101...
01
WW
Calendar
week
The row order can vary depending on the production year, only the longer row is
relevant. The back part of this and the shorter row contain internal administration
information from the manufacturer.
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
14
01
YY
FW --
Year
Firmware
Hardware
version
01
01
HW
FL
Firmware
version
loader
version
Device Description
(additional positions)
-
Internal information
29