Lon ® Ftt Module; Enocean Radio Receiver; Mp Bus Master Module; Table 303: Enocean Radio Receiver 750-642 - WAGO I/O SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
®
15.1.5.13 LON FTT Module
753-648
The process image of the LON
23 bytes of bidirectional communication data that is processed by the
WAGO-I/O-PRO function block "LON_01.lib". This function block is essential
for the function of the LON
control side.

15.1.5.14 EnOcean Radio Receiver

750-642
The EnOcean radio receiver has a total of 4 bytes of user data in both the Input
and Output Process Image (3 bytes of module data and 1 byte of control/status).
The following tables illustrate the Input and Output Process Image, which have 2
words mapped into each image. Word alignment is applied.

Table 303: EnOcean Radio Receiver 750-642

Input Process Image
Offset
0
1
Output Process Image
Offset
0
1

15.1.5.15 MP Bus Master Module

750-643
The MP Bus Master Module has a total of 8 bytes of user data in both the Input
and Output Process Image (6 bytes of module data and 2 bytes of control/status).
The following table illustrates the Input and Output Process Image, which have 4
words mapped into each image. Word alignment is applied.
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
®
FTT module consists of a control/status byte and
®
FTT module and provides a user interface on the
Byte Destination
High Byte
D0
D2
Byte Destination
High Byte
-
-
Low Byte
S Data byte
D1
Low Byte
C not used
-
Appendix 421
Description
Status byte
Data bytes
Description
Control byte
not used