Syslibcom.lib; Syslibfile.lib - WAGO I/O SYSTEM 750 Manual

428 Appendix
Table 311: CODESYS System Libraries
Library
SysTaskInfo.lib
Util.lib
Util_no_Real.lib
Additional information about the libraries is given in the online Help function for
CODESYS-IDE.
</dg_
15.2.1.2

SysLibCom.lib

The controller 750-8208supports the following function blocks of the
"SysLibCom.lib" library:
- SysComClose
- SysComGetVersion2300
- SysComOpen
- SysComRead
- SysComSetSettings
- SysComSetSettingsEx
- SysComWrite
Observe restrictions on the settings for stop bits!
The setting "1.5 stop bits" is not supported by controller750-8208.
Additional information about this is given in the online Help function for
CODESYS-IDE.
15.2.1.3

SysLibFile.lib

The controller 750-8208supports the following function blocks of the
"SysLibFile.lib" library:
- SysFileClose
- SysFileCopy
- SysFileDelete
- SysFileEOF
- SysFileGetPos
- SysFileGetSize
- SysFileGetTime
- SysFileOpen
- SysFileRead
- SysFileRename
- SysFileSetPos
- SysFileWrite
750-8208 PFC200 CS 2ETH RS CAN DPM
Function
Evaluation of task information in
the Online mode
Various logical operations
Various logical operations
Version 1.1.0, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
C/IEC 61131
IEC 61131
IEC 61131
IEC 61131
Manual