Ports And Services" > "Dhcpd" Submenu; Dhcpd" > "Xn" Submenu; Table 167: "Ports And Services" > "Dhcpd" Submenu; Table 168: "Ports And Services" > "Dhcpd" > "Xn" Submenu - WAGO I/O SYSTEM 750 Manual

192 Commissioning
7.6.4.11.9 "Ports and Services" > "DHCPD" Submenu
This submenu contains the settings for the DHCPD service.
Table 167: "Ports and Services" > "DHCPD" Submenu
Menu Item
0. Back to ...
1. DHCPD Firewalling
2. X1
3. X2
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
7.6.4.11.10 "DHCPD" > "Xn" Submenu
This submenu contains the settings for the DHCPD service for the selected
interface.
Table 168: "Ports and Services" > "DHCPD" > "Xn" Submenu
Menu Item
0. Back to ...
1. State
2. Range
3. Lease Time (min)
4. Add static hostname
(5 + n). Static Host (n)
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Click [<OK>] to apply the entry.
Click [<Abort>] to discard the entry.
750-8208 PFC200 CS 2ETH RS CAN DPM
Explanation
Back to the higher-level menu
Opens a submenu with firewall settings for the this
service for the interfaces
Opens a submenu with the DHCPD settings for the
selected interface
Submenu Item / Explanation
Back to the higher-level menu
Enable/disable the DHCPD service for the Xn
interface.
0. Back to ... Back to the higher-level menu
1. Enable The DHCPD service is enabled.
2. Disable The DHCPD service is disabled.
Enter a range of available IP addresses.
Specify the lease time here in seconds. 120 seconds
are entered by default.
Enter a new static assignment of MAC ID to IP
address,
e.g., "01:02:03:04:05:06=192.168.1.20" or
"hostname=192.168.1.20".
You can enter 10 assignments.
This displays the static assignments.
0. Back to ... Back to the higher-level menu
Opens a submenu to change the
1. Edit
selected assignment
2. Delete Deletes the selected assignment
Version 1.1.0, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
Manual