Figure 46: "Wago Ethernet Settings" - Communication Link - WAGO I/O SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
Figure 46: "WAGO ETHERNET Settings" – Communication Link
Once you have configured "WAGO ETHERNET Settings" and have clicked
[OK], connection to the controller is established automatically.
If "WAGO ETHERNET Settings" has already been started with the correct
parameters, you can establish connection to the controller by clicking [Identify].
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Commissioning 203