Device Description - WAGO I/O SYSTEM 750 Manual

24

Device Description

3 Device Description
The controller 750-8208(PFC200 CS 2ETH RS CAN DPM) is an automation
device that can perform control tasks of a PLC. It is suitable for mounting on a
DIN rail and stands out on account of its various interfaces.
This controller can be used for applications in mechanical and systems
engineering, in the processing industry and in building technology.
You can connect all available I/O modules of the WAGO-I/O-SYSTEM 750 (750
and 753 Series) to the controller, enabling it to internally process analog and
digital signals from the automation environment, or to supply these signals to
other devices via one of the available interfaces.
Automation tasks can be executed in all IEC 61131-3-compatible languages with
the programming system CODESYS 2.3 (WAGO-I/O-PRO).
The implementation of the task processing in the runtime system for Linux
been optimized with real-time extensions in order to provide maximum
performance for automation tasks. Web visualization is also provided as
visualization in addition to the development environment.
The controller provides a 16 Mbyte program memory, a 64 Mbyte data memory
and a 128 kbyte remanent memory (retain and flag variables) in an integrated
NVRAM for IEC-61131-3 programming on CODESYS applications.
</dg_ Two ETHERNET interfaces and an integrated, interruptible switch enable wiring
for:
• In line topology with a common MAC address and IP address for both
interfaces.
• Two separate networks with a common MAC address and an IP address for
each interface.
Both of these interfaces support:
• 10BASE-T / 100BASE-TX
• Full/Half duplex
• Autonegotiation
• Auto-MDI(X) (automatic uplink and crossover switching)
The following fieldbus circuits are implemented for exchange of process data:
• MODBUS TCP Master/Slave
• MODBUS UDP Master/Slave
• MODBUS RTU Master/Slave (via RS-232 or RS-485)
750-8208 PFC200 CS 2ETH RS CAN DPM
Version 1.1.0, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
®
has
Manual