336
CANopen Master and Slave
2.
In the "CAN Parameters" tab, select the required baud rate.
Figure 139: Setting the Baud Rate
To add a slave, right-click CANopen Master[SLOT] and select Attach
3.
sub-element > Generic CAN Device (EDS) ... in the contextual menu.
Figure 140: EDS File "Generic CAN Device"
750-8208 PFC200 CS 2ETH RS CAN DPM
Version 1.1.0, valid from FW Version 02.06.20(09)
WAGO-I/O-SYSTEM 750
Manual