WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
7.6.4.2
"Information" Menu
This menu contains other submenus with information on the controller and
network.
Table 107: "Information" Menu
Menu Item
0. Back to ...
1. Controller Details
2. Network Details
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
7.6.4.2.1 "Information" > "Controller Details" Submenu
In this submenu, the controller properties are displayed.
Table 108: "Information" > "Controller Details" Submenu
Parameters
Product Description
Order Number
License Information
Firmware Revision
To return to the higher-level menu, press [Q] or [Return].
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Explanation
Back to the higher-level menu
Opens a submenu with controller properties
Opens a submenu with controller network and
interface properties
Explanation
Controller identification
Item number of the controller
Notification that the CODESYS runtime system is
available
Firmware status
Commissioning
155