Ports And Services" > "Dns" Submenu; Table 169: "Ports And Services" > "Dns" Submenu - WAGO I/O SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
7.6.4.11.11 "Ports and Services" > "DNS" Submenu
This submenu contains the settings for the DNS service.
Table 169: "Ports and Services" > "DNS" Submenu
Menu Item
0. Back to ...
1. State
2. Mode
3. Firewall status
4. Add static hostname
(5 + n). Static Host (n)
To make a selection, choose the appropriate menu item.
To return to the higher-level menu, press [Q].
Click [<OK>] to apply the entry.
Click [<Abort>] to discard the entry.
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Submenu Item / Explanation
Back to the higher-level menu
Enable/disable the DNS service.
0. Back to ... Back to the higher-level menu
1. Enable The DNS service is enabled.
2. Disable The DNS service is disabled.
Select the operating mode of the DNS server.
0. Back to ... Back to the higher-level menu
The requests are buffered to optimize
1. Proxy
throughput.
2. Relay All requests are routed directly.
Opens a submenu with firewall settings for the this
service for the interfaces
Enter a new static assignment of IP address to
hostname,
e.g., "192.168.1.20:hostname".
You can enter 10 assignments.
This displays the static assignments.
0. Back to ... Back to the higher-level menu
Opens a submenu to change the
1. Edit
selected assignment
2. Delete Deletes the selected assignment
Commissioning 193