Wbm User Group; Linux ® User Group; Snmp User Group; Table 32: Wbm Users - WAGO I/O SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM

4.1.2.1.2 WBM User Group

WBM has its own user administration system. The users in this system are
isolated from the other user groups in the system for security reasons.
Detailed information about this is given in the Section "WBM User
Administration".

Table 32: WBM Users

Users
admin
user
guest
Change passwords
Default passwords are documented in these instructions and therefore do not offer
adequate protection! Change the passwords to meet your particular needs.
®
4.1.2.1.3 Linux User Group
The Linux
likewise used by most services.
The passwords for these users must be configured through a terminal connection
via SSH/RS-232.
Table 33: Linux
User
root
admin
user
Change passwords
Default passwords are documented in these instructions and therefore do not offer
adequate protection! Change the passwords to meet your particular needs.

4.1.2.1.4 SNMP User Group

The SNMP service manages its own users. In its initial state, no users are stored in
the system.
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Permissions
All (administrator)
Supported to a limited extent
Display only
®
users group include the actual users of the operating system, which is
®
Users
Special Feature
Super user
CODESYS user
Normal user
Function Description
Home Directory
/root
/home/admin
/home/user
57
Default Password
wago
user
---
Default Password
wago
wago
user