Dns Server" Group; Table 51: Wbm "Tcp/Ip Configuration" Page - "Dns Server" Group - WAGO I/O SYSTEM 750 Manual
750-8208
pfc200 cs 2eth rs can dpm
plc - controller pfc200
Hide thumbs
Also See for I/O SYSTEM 750:
- Manual (296 pages) ,
- Quickstart reference (54 pages) ,
- Quick start manual (18 pages)
Table of Contents
Advertisement
WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
7.6.1.8.3 "DNS Server" Group
Table 51: WBM "TCP/IP Configuration" Page – "DNS Server" Group
Parameters
Configured: None/
DNS Server n
New Server IP
Additionally used
(assigned by DHCP)
Click [Delete] to remove the selected DNS server. The change is effective
immediately.
Click [Add] to add the entered DNS server. The change is effective immediately.
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Explanation
The addresses of the defined DNS servers are
displayed. If no server has been defined,
"Configured: None" is displayed.
Add additional DNS addresses.
You can enter 10 addresses.
The DNS servers assigned if necessary by DHCP (or
BootP) are displayed. If no DNS server has been
assigned by DHCP (or BootP), "none" is displayed.
Commissioning
107
Advertisement
Chapters
Table of Contents
Troubleshooting
