Notes About This Documentation; Validity Of This Documentation; Copyright; Table 1: Variants - WAGO I/O SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
1

Notes about this Documentation

Always retain this documentation!
This documentation is part of the product. Therefore, retain the documentation
during the entire service life of the product. Pass on the documentation to any
subsequent user. In addition, ensure that any supplement to this documentation is
included, if necessary.
1.1

Validity of this Documentation

This documentation is only applicable to the controller "PFC200 CS 2ETH RS
CAN DPM" (750-8208) and the variants listed in the table below.

Table 1: Variants

Item Number/Variant
750-8208
750-8208/025-000
Documentation Validity for Variants
Unless otherwise indicated, the information given in this documentation applies to
listed variants.
This documentation is only applicable from FW Version 02.06.20(09).
1.2

Copyright

This Manual, including all figures and illustrations, is copyright-protected. Any
further use of this Manual by third parties that violate pertinent copyright
provisions is prohibited. Reproduction, translation, electronic and phototechnical
filing/archiving (e.g., photocopying) as well as any amendments require the
written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.
Non-observance will involve the right to assert damage claims.
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Notes about this Documentation
Designation
PFC200 CS 2ETH RS CAN DPM
PFC200 CS 2ETH RS CAN DPM/T
15