WAGO-I/O-SYSTEM 750
750-8208 PFC200 CS 2ETH RS CAN DPM
10.3.5.2
Configuring of CANopen Parameters
Figure 127: Configuration of CANopen Slave Parameters
Table 222: Description of CANopen Slave Settings
Parameters
Baud rate
Node ID
Manual
Version 1.1.0, valid from FW Version 02.06.20(09)
Explanation
Specify the baud rate to apply for the transfer on the CAN bus
(default setting: 125000 baud).
PFC's Node ID on the CAN bus.
CANopen Master and Slave
323